SB-COMEX-T6 Carrier Board
- COM Express Rev. 2.0, Pin-out Type 6
- ATX Form Factor (305mm x 244mm)
- HDMI, DisplayPort, LVDS, eDP
- USB3, PCIe, mPCIe, SATA, GbE
-
COM Express evaluation board SB-COMEX-T6 is a COM Express carrier board designed as an evaluation platform for COM Express Computer-on-Modules and a reference for custom carrier board development. SB-COMEX-T6 is fully compliant with the COM Express standard.
Versatile development platform SB-COMEX-T6 has been designed to allow users full and easy access to all functions present on COM Express Type-6 Computer-on-Modules. Combining extensive and highly configurable set of interfaces and connectors with rich debug functionality, SB-COMEX-T6 allows all around evaluation and SW development with COM Express Computer-on-Modules.
Comprehensive design reference and documentation CompuLab provides SB-COMEX-T6 with comprehensive documentation and hardware design packages including technical manuals, application notes, design schematics and layout design.
-
- "Option" column specifies the configuration code required to have the particular feature.
- "+" means that the feature is always available
General
Supported Modules COM Express basic and compact with pin-out Type 6 + Compliance COM Express Rev. 2.0
Pin-out Type 6+ Display
HDMI / DisplayPort Up-to 3x HDMI or DisplayPort (DDI1, DDI2, DDI3) + LVDS 1x dual-channel LVDS, 40-pos FPC connector + eDP 1x eDP, standard DisplayPort connector
* mutually exclusive with LVDS+ VGA 1x VGA, standard VGA connector + Storage
Hard Disk 4x SATA ports, SATA connector + mSATA 1x mSATA
* precludes one of the SATA ports+ SD 1x uSD connector + Network
Ethernet 1x 10/100/1000 MBit Ethernet port, RJ45 connector
+ Audio
Analog Audio On-board Realtek ALC886 codec
7.1 Audio jacks
+ Digital Audio S/PDIF in/out, Toslink connector + HDMI audio output + I/O
PCI Express 1x PCIe x16 + 1x PCIe x4 + 1x PCIe x1 + 2x mini-PCie sockets + USB 4x USB3.0 + 2x USB2.0 + Serial 1 x RS232 (RX/TX only), ultra-mini serial connector + CAN bus 1x CAN, RJ45 connector + GPIO 8x GPIO, 100-mil header + System
General Features PWM fan control
Feature Connector
SIM socket
PWR/RST Buttons
+ Debug Features SPI boot
Port80 POST Code Display
Diagnostic LED+ Power Supply ATX power supply 24 pin
12V DC Jack+ Electrical Specifications
Supply Voltage
8.5V – 12V Mechanical Specifications
Form-factor ATX Dimensions 305 x 244 mm Weight 460 gram Environmental and Reliability
MTTF > 200,000 hours Operation temperature (case) Commercial: 0° to 70° C
Extended: -20° to 70° C
Industrial: -40° to 85° C. Click for availability noteStorage temperature -40° to 85° C Relative humidity 10% to 90% (operation)
05% to 95% (storage)Shock 50G / 20 ms Vibration 20G / 0 - 600 Hz -
-
Hardware Documentation
Hardware Design Resources
-
Product status: Introduction
The CompuLab part number specifies all options available for a particular product. P/N template: SB-COMEX-T6-[Tx]Minimal Configuration
Minimal configuration P/N: SB-COMEX-T6 1K-units price $259 Optional Features
Feature Options P/N code Add ($) Temperature range Commercial
Extended
Industrial-
TE
TI-
20
100- Prices are specified in U.S. Dollars. Prices are periodically updated according to variations in component costs. Prices are subject to change without advance notice.
Small Quantity Orders
Pricing is specified for 1000-unit orders. In order to calculate the price for another quantity, multiply the unit price (with selected options) by the factor listed in the table below:
QTY Factor 1K 1.0 500 1.1 100 1.2 10 1.3 1 1.4