SBC-T3530 Single Board Computer

ARM single board computer featuring high performance in a low-power envelope.
Highly customizable feature-set enables
price / performance optimization.
Ready-to-run platform with a broad range of standard interfaces.

Overview

Product Highlights

Single Board Computer implemented by the combination of a CM-T3530 module and a SB-T35 baseboard.
Texas Instruments OMAP3530 CPU @ 720 MHz, 256 MB mDDR, 512 MB Flash Disk
WLAN / WiFi 802.11b/g interface
1400 x 1050 graphics controller with interfaces for LVDS, RGB and DVI
TV-out with S-Video interface
Camera interface
3 serial ports
Host and slave USB ports
Touchscreen interface
Keypad and GPIO connectors
Sound codec with stereo output and line input
Two 100 Mbps Ethernet ports
MMC / SD / SDIO socket
RTC with back-up battery
Lithium-ion battery charger

Note: some of above specified features are optional

Description

The SBC-T3530 is a small single board computer based on the Texas Instruments OMAP3530 processor. It is implemented by a CM-T3530 module providing most of the functions, in combination with SB-T3530 carrier board providing connectors and several additional features. The rich feature set of the SBC-T3530 is customizable according to the price / performance targets of the user's application.

OMAP3530 processor of SBC-T3530 combines two CPU cores in single package - an advanced Cortex-A8 ARM CPU for running operating system and application code, and TMS32064x DSP for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby.

Power supply options of the SBC-T3530 enable its integration in mobile applications powered by a rechargeable battery. Charger and battery management support is provided on-board.

Block Diagram

Specifications

The "SB Option" column specifies the P/N code of SB-T35 carrier board required to have the particular feature. The "CM Option" column specifies the P/N code of CM-T3530 required to have the particular feature. SBC-T3530 content is the combination of features provided by the attached CM-T3530 and the features implemented on the SB-T35. To have the particular feature, both the CM and SB options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.

CPU, Memory and Busses

Feature	Specification	SB Option	CM Option
CPU SDRAM Flash Disk	See Feature List of CM-T3530 module	+
COM-A	RTS/CTS controls, 1.8V levels, 100-mil header	+	+
COM-B	RTS/CTS controls, 1.8V levels, 100-mil header	+	+
COM-C	Rx/TX only, RS-232, ultra mini serial conn.	+	+
Ethernet	CM-T3530 100 Mbps Ethernet port. LAN9220 controller. RJ-45 connector and activity LED's	+	E
Ethernet	SB-T35 100 Mbps Ethernet port. LAN9220 controller. RJ-45 connector and activity LED's	E	+
LCD Panel	TD035STEE1 (3.5”, 480x640, TFT) panel support. 60-pos FPC connector for direct interface to TD035STEE1	+	+
LCD Panel	STN and TFT panel support. 40-pos FPC connector for direct interface to certain TFT panels	+	+
DVI	DVI monitor support, HDMI connector	LD	+
LVDS	4 pair LVDS panel interface, 100-mil header	LL	+
TV-out	Composite video, S-Video connector	+	+
USB 2.0 OTG	USB 2.0 OTG port, USB mini-AB connector	+	+
USB 2.0 host	Two USB 2.0 host ports, 480 Mbps. Implemented by USB 2.0 high-speed hub. Type-A connector	+	U
USB 2.0 host	One USB 2.0 high speed port, 480 Mbps. Implemented by dedicated USB 2.0 high-speed controller), 100-mil header	+	U
GPIO	12 lines on 100-mil header.	+	+
Touch Panel	TSC2046 touchscreen controller for resistive panels. Interface to LCD panel	+	I
Sound I/O	I2S compliant audio codec, Line input and Speakers (stereo) jacks	+	+
RTC Battery	Real time clock component on CM-T3530, supplied by lithium battery on SB-T35	+	W
WiFi	WiFi interface provided by CM-T3530	+	+
SDIO / MMC	MMC / SD / SDIO support including SDHC up to 32GB. Standard full-size SD socket.	+	+
Camera interf	24-pos FPC connector for direct interface to certain camera modules	+	+
Battery management	Charging and supervision support for Lithium-ion polymer batteries	S	+

Electrical, Mechanical and Environmental Specifications

Supply Voltage	High efficiency switched power supply. Support of sleep mode. Unregulated 3.3 to 4.2 volt input from battery or regulated 5V from wall adapter
Power Consumption	1W to 3W in full activity, depending on CPU speed and selected features Below 50mW in sleep mode
Dimensions	166 mm (L) x 82 mm (W) x 23 mm (H)
Weight	107 gram
Operation temp (case)	Commercial: 0° to 70° C Extended: -20° to 70° C Industrial: -40° to 85° C. Click for availability note
Storage temperature	-40° to 85° C
Relative humidity	10% to 90% (operation) 05% to 95% (storage
Shock	50G / 20 ms
Vibration	20G / 0 - 600 Hz
MTBF	> 100,000 hours

Resources

CM-T3530 and SBC-T3530 Evaluation Kit

Package contents

Technical Support

Technical support for 12 months.
LCD panel compatibility verification and driver adaptation service.
45-day trial period. Eval Kit will be accepted for refund if the user finds the product not suitable for his needs.

Hardware

CM-T3530-D256-C720M-N512-E-I-U-W
SB-T35-E-LL-LD-S
WiFi antenna and cable
Serial port cable
HDMI to DVI cable
USB cable and adapter
3.5" 640 x 480 LCD panel with touchscreen and stylus pen
2MP USB camera module
Adapters & cables for generic LCD panel interface
Keypad and cable
Lithium-ion battery, 2.85 A/h
5V power supply

Pricing and Ordering

The CompuLab part number specifies all options available for a particular product.

Note: The SB-T35 base-board must contain a CM-T3530 module for the implementation of a self-contained SBC. Options specified on this page refer to the SB-T35 only.

P/N template: SB-T35-[E]-[LL]-[LD]-[S]

Minimal Configuration

Minimal configuration P/N: SB-T35
1K-units price	$57
10K-units price	$51

Optional Features

Feature	Options	P/N code	Add ($)
Second Ethernet port	No Yes	- E	6
LVDS interface	No Yes	- LL	5
DVI interface	No Yes	- LD	5
Battery charger and supervisor	No Yes	- S	4
Temperature range	Commercial Extended Industrial	- TE TI	- 10 40
Cables, connectors and accessories	click here

Prices are specified in U.S. Dollars. Prices are periodically updated according to variations in component costs. Prices are subject to change without advance notice.

Small Quantity Orders

Pricing is specified for 1000-unit orders. In order to calculate the price for another quantity, multiply the unit price (with selected options) by the factor listed in the table below:

QTY	Factor
10K	0.9
1K	1.0
500	1.2
100	1.5
10	2.0
1	2.5

CompuLab