CL-SOM-iMX6 - NXP i.MX6 System-on-Module
- High performance graphics and image processing
- Wide range of high-speed interfaces
- Miniature size and power efficiency
-
NXP i.MX6 processor family
- Quad-core ARM Cortex-A9 CPU, 1GHz
- Integrated 2D/3D GPU and 1080p VPU
- Dual display support
Feature Highlights
- Up to 4GB DDR3 and 32GB eMMC
- LVDS, MIPI-DSI, Parallel RGB, up to 1920 x 1080
- GbE, PCIe, SATA, 5x USB, 5x UART, 2x CAN
- WiFi 802.11b/g/n/ac and Bluetooth 4.1 BLE
Mainline Linux and Yocto Project
- Full Board Support Package and ready-to-run images
- Linux kernel, Yocto Project file-system and U-Boot
- Mainline Linux kernel support
Why choose CompuLab?
10-year Availability
Direct Engineer Support
Mainline Linux and Yocto
In-House Manufacturing
Industrial Temperature
Configure-to-Order
Learn more about CompuLab advantages.
-
- "Option" column specifies the configuration code required to have the particular feature.
- "+" means that the feature is always available
CPU Core
CPU NXP (Freescale) i.MX6 single-core ARM Cortex-A9, 1GHz
NEON SIMD and VFPv3C1000 NXP (Freescale) i.MX6 dual-core ARM Cortex-A9, 1GHz
NEON SIMD and VFPv3C1000D NXP (Freescale) i.MX6 quad-core ARM Cortex-A9, 1GHz
NEON SIMD and VFPv3C1000Q NXP (Freescale) i.MX6 Plus quad-core ARM Cortex-A9, 1GHz
NEON SIMD and VFPv3C1000QP Video Video Processing Unit with HW decoding/encoding
Up to 1080p plus SD 30fps decoding (H.264, VC1, RV10, DivX, etc.)
Up to 1080p 30fps encoding (H.264, etc.)+ GPU 3D: Vivante GC880, 35Mtri/s 266Mpxl/s, support for Open GL ES 2.0
2D: Vivante GC320, 600Mpxl/s, BLITC1000 3D: Vivante GC2000+, 200Mtri/s 1000Mpxl/s, OpenGL ES 3.0 & Halti, OpenCL
2D: Vivante GC320, 600Mpxl/s, BLIT + Vivante GC355, 300Mpxl/s, OpenVG 1.1not C1000 Memory and Storage
RAM 512MB – 4GB, DDR3-1066 D Storage SLC NAND flash, 512MB - 1GB N eMMC flash, 4GB - 32GB Display and Camera
Display Parallel 24-bit display interface, up to 1920 x 1080 @60Hz + HDMI 1.4, up to 1920 x 1080 @60Hz 2x LVDS, up to 1920 x 1080 @60Hz MIPI-DSI, 2 lanes @ 1 Gbps Simultaneous operation of up to 2 interfaces
Total pixel rate of up to 2x WXGA (1366 x 786)C1000 Simultaneous operation of up to 4 interfaces
Total pixel rate of up to 2x QXGA (2048 x 1536)not C1000 Touchscreen On-board 4-wire resistive touch-screen controller I Capacitive touch-screen support through SPI and I2C interfaces + Camera Parallel camera interface, up to 20-bit + MIPI CSI-2, supports from 80Mbps up-to 1Gbps per data lane + Network
Gigabit
Ethernet10/100/1000Mbps Ethernet port (MAC+PHY) E WiFi 802.11b/g/n WiFi interface
Broadcom BCM4343W chipsetWB 802.11a/b/g/n/ac WiFi interface
Broadcom BCM4339 chipsetWAB Bluetooth Bluetooth 4.1 BLE WB or WAB Audio
Analog Audio Audio codec with analog stereo output, stereo input and electret microphone support A Digital Audio Up-to 3x I2S compliant digital audio interfaces + HDMI audio output and S/PDIF input/output + I/O
PCI Express PCIe x1 Gen. 2.0 + USB 1x OTG + 1x host USB2.0 ports, 480 Mbps U2 1x OTG + 4x host USB2.0 ports, 480 Mbps U5 SATA SATA II, 3.0 Gbps not C1000 UART RS-232 port, rx/tx only, RS-232 levels (precludes 1 UART port) + Up to 5x UART ports, 3.3V interface, up to 5.0 Mbps + CAN bus Up to 2x CAN bus, 3.3V levels + MMC/SD/
SDIOUp to 3x MMC/SD/SDIO, support SDHC up to 32GB SDIO1 – 1/4 bit transfer modes not Wx SDIO2 – 1/4 bit transfer modes not A SDIO3 – 1/4/8bit transfer modes (bootable) + SPI Up to 4x SPI + I2C Up to 3x I2C + PWM Up to 4x general purpose PWM signals + GPIO Up to 112x GPIO (multifunctional signals shared with other functions) + System Logic
RTC Real time clock, powered by external battery + Electrical Specifications
Supply Voltage
3.3V to 4.5V / Li-Ion battery Digital I/O voltage 3.3V Active power consumption 2.0 – 6.0 W, depending on board configuration, CPU frequency and system load Mechanical Specifications
Dimensions 75 x 65 x 6 mm Weight 60 gram Connectors 2 x 140 pin, 0.6 mm Environmental and Reliability
MTTF > 200,000 hours Operation temperature (case) Commercial: 0° to 70° C
Extended: -20° to 70° C
Industrial: -40° to 85° C. Click for availability noteStorage temperature -40° to 85° C Relative humidity 10% to 90% (operation)
05% to 95% (storage)Shock 50G / 20 ms Vibration 20G / 0 - 600 Hz -
-
Hardware Resources
Software Resources
-
CL-SOM-iMX6 and SBC-iMX6 Evaluation Kit
Hardware
- SOM-iMX6-C1000QP-D2-N16-E-A-I-U5-WAB-H
- SB-FX6-Y-Z-EVAL carrier board
- WiFi antenna and cable
- Serial port cable
- HDMI to DVI cable
- USB cable and adapter
- LCD panel
- Adapters & cables for generic LCD panel interface
- 12V power supply
Technical Support
- Technical support for 12 months.
- Schematics review of the customer's carrier board design.
- LCD panel compatibility verification and driver adaptation service.
- 45-day trial period. Eval Kit will be accepted for refund if the user finds the product not suitable for his needs.
Documents and Guides
-
Product status: Active
CompuLab part number specifies all options available for a particular product. P/N template: SOM-iMX6-Cx-Dx-Nx-[E]-[A]-[I]-Ux-[Wx]-[H]-[Tx]Minimal Configuration
Minimal configuration P/N: SOM-iMX6-C1000-D05-U2 1K-unit price: $67 Optional Features
Feature Options P/N code Add ($) CPU type i.MX6 Solo, 1GHz
i.MX6 Dual, 1GHz
i.MX6 Quad, 1GHz
i.MX6 Quad Plus, 1GHzC1000
C1000D
C1000Q
C1000QP-
14.4
37.2
40.8DRAM size 512MB
1GB
2GB
4GBD05
D1
D2
D4-
7.2
22.8
40.8Storage None
512MB NAND (SLC)
1GB NAND (SLC)
4GB eMMC (MLC)
16GB eMMC (MLC)
32GB eMMC (MLC)-
N05
N1
N4
N16
N32-
12
14.4
7.2
16.8
34.8Ethernet port No
Yes
-
E-
3.6Analog audio No
Yes-
A-
2.4Touchscreen No
Yes-
I-
1.2USB ports 2
5U2
U5-
2.4WiFi & Bluetooth none
WiFi 802.11 b/g/n and Bluetooth
WiFi 802.11 a/b/g/n/ac and Bluetooth-
WB
WAB-
16.8
24Heat dissipation plate No
Yes-
H-
4.8Temperature range Commercial
Industrial Certified
Extended Tested
Industrial Tested-
TIC
TET
TIT-
18
24
100Software Preloading No
Yes-
X-
$1/100MB- Prices are specified in U.S. Dollars. Prices are periodically updated according to variations in component costs. Prices are subject to change without advance notice.
Small Quantity Orders
Pricing is specified for 1000-unit orders. In order to calculate the price for another quantity, multiply the unit price (with selected options) by the factor listed in the table below:
QTY Factor 1K 1.0 500 1.2 100 1.5 10 2.0 1 2.5