SBC-iTC Single Board Computer

Low cost, PC-compatible single board computer in a mini-ATX form factor.
Highly integrated design delivers rich multimedia and video features.
Wide range of high-speed interfaces provides extensive connectivity.

Overview

mini-ATX PC implemented by the combination of a CM-iTC module and SB-iTC baseboard
Intel Atom E680 (Tunnel Creek) CPU @1.6GHz and EG20T chipset
Up to 2 GB DDR2
8-23 GB microSD Flash Disk
Two SATA hard disk interfaces
Two 1000 BaseT Ethernet ports
Six USB host ports and one device port
MMC/SD socket
Two HD Sound codecs with support for 5.1 HD audio and 2W external speakers
PCI and PCI-express extension buses
Serial ports, GPIO, I2C, SPI & CANbus
Programmable watchdog timer
IEEE1588 device support
7 - 20 volt supply, 4 - 9 watt

Description

The SBC-iTC is single board computer with mini-ATX form factor. It is implemented by a CM-iTC module providing most of the functions, and a SB-iTC carrier board providing connectors and several additional functions. The rich feature set of the SBC-iTC is customizable according to the price / performance targets of the user's application.

The SBC-iTC contains expansion connectors which opens it to the wide range of standard peripheral cards. Wide input range switched power supply is compatible with requirements for telecom and automotive applications.

For feature support status, please refer to See O/S Support Coverage Map .

Specifications

The "SB Option" column specifies the P/N code of SB-iTC carrier board required to have the particular feature. The "CM Option" column specifies the P/N code of CM-iTC required to have the particular feature. SBC-iTC feature-set is the combination of features provided by the attached CM-iTC and the features implemented on the SB-iTC. To have the particular feature, both the CM and SB options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.

CPU, Memory and Busses

Feature	Specification	SB Option	CM Option
CPU SDRAM Flash Disk	See Feature List of CM-iTC module
UARTs	COM0 - full modem controls, RS-232 levels, DB9 connector COM1 - Rx/Tx only, RS-232/RS485 levels , mini serial connector COM2 - Rx/Tx only, RS-232 levels, mini serial connector COM3 - Rx/Tx only, RS-232 levels, mini serial connector	+	+
Hard disk	2 SATA interfaces , on 7-pin vertical SATA connector	+	+
Ethernet	One or two 1000 Mb Ethernet ports, using Realtek RTL8111 provided by CM-iTC CoM. RJ-45 connectors and activity LED's are provided on SB card.	+	Ex
TFT Panel	TFT (digital RGB) panel interface 18 and 24 bit. Two connectors for direct interfacing to certain TFT panels	+	L
LVDS Panel	4 pair LVDS panel interface	+	+
CRT Monitor	Analog RGB interface for CRT and FP monitors, through HDB15 connector	M	+
CAN	CAN bus interface with isolator and driver , on 100-mil header	+	+
Host USB	6 USB Host ports, 480 Mbps. Type-A connector.	+	+
Device USB	One USB device port on micro serial USB connector	+	+
Sound I/O	One or two audio codecs: ALC662 codec on module, headphone / speakers output line in / microphone in /SPDIF with coaxial interface 92HD83 Codec on baseboard, 5.1 speaker output, SPDIF with optical interface and coaxial interfaces	+ A	A +
PCI-express extension	Standard PCIexpress X1 slot	P	+
PCI extension	Single PCI slot, configurable 3.3V or 5V Vio Note: only one of extension slots is functional at a time: PCI or PCIexpress	P	+
I2C	2 interfaces (one SMBus –up to 1MHz and one I2C up to 400kHz ) , on 100-mil header	+	+
MMC/SD/SDIO	One full-size SD socket	+	+
GPIO	Up to 18 lines, on 100-mil header	+	+
RTC Battery	Real time clock operated from on-board rechargeable lithium battery	+	+

Electrical, Mechanical and Environmental Specifications

Supply Voltage	High efficiency switched power supply. Support of sleep mode. Input - unregulated 7V to 20V
Power Consumption	5W to 9W in full activity, depending on CPU speed and selected features Below 0.4W in sleep mode
Dimensions	190mm x 170mm Height ranges from 10 mm to 37 mm, depending on the connectors assembled. The height specified includes the CM-iTC module.
Operation temp (case)	Commercial:0° to 70° C Extended:-20° to 70° C Industrial:-40° to 85° C. Click for availability note
Storage temperature	-40° to 85° C
Relative humidity	10% to 90% (operation) 05% to 95% (storage)
Shock	50G / 20 ms
Vibration	20G / 0 - 600 Hz
MTBF	> 100,000 hours

Block Diagram

Resources

CM-iTC & SB-iTC evaluation kit

Package contents

Technical Support

Technical support for 12 months.
LCD panel compatibility verification and driver adaptation service.
45-day trial period. Eval Kit will be accepted for refund if the user finds the product not suitable for his needs.

Hardware

CM-iTC-D1G-C1300-L-N8-E2-A-H
SB-iTC-M-P-A
SDVO to HDMI interface module (EB-DVI)
HDMI to DVI video cable
FPC cable and connector for LCD
Serial port cable
12V power supply
SATA-15 power cable (5V,16cm)

Pricing and Ordering

Product status: Discontinued

The CompuLab part number specifies all options available for a particular product.

Note: The SB-iTC base-board must contain a CM-iTC module for the implementation of a self-contained SBC. Options specified on this page refer to the SB-iTC only.

P/N template: SB-iTC-[M]-[P]-[A]

Minimal Configuration

Minimal configuration P/N: SB-iTC
1K-units price	$72
10K-units price	$65

Optional Features

Feature	Options	P/N code	Add ($)
Analog RGB interface	No Yes	- M	- 8
PCI bridge	No Yes	- P	- 9
Second 5.1 channel audio codec	No Yes	- A	- 5
Temperature range	Commercial Extended Industrial	- TE TI	- 10 50
Cables, connectors and accessories	click here

Prices are specified in U.S. Dollars. Prices are periodically updated according to variations in component costs. Prices are subject to change without advance notice.

Small Quantity Orders

Pricing is specified for 1000-unit orders. In order to calculate the price for another quantity, multiply the unit price (with selected options) by the factor listed in the table below:

QTY	Factor
10K	0.9
1K	1.0
500	1.2
100	1.5
10	2.0
1	3.0

CompuLab